Maximum Web width 340mm
Printable width 324mm
Max Speed 135m/m 1600 X 1280 DPI
Australian Manufactured Main Solid Machine Frame 20mm
Unwind Brake closed loop electronic tension control
Electronic web guide
Durabolt Print Engine including Softrip Modbus network (Designed and manufactured by Memjet Sydney Australia) including CMYK 10L ink and dual print head included.
User HMI to fully operate with the Durabolt (designed and manufactured by Gulmen Digital)
Infeed/outfeed nip including closed loop servo tension control.
3000 Lineal Meter unwind station (800mm)
3000 Lineal meter Rewind station fully servo closed loop tension control with taper tension control.
Automatic core chuck on/off
NIR Heater Station solution print onto majority of substrates
OPTION-1 (Optional added component)
100% Vision inspection camera system
The DuraBolt 325C PrintEngine was purpose-built for high-volume print runs to deliver CMYK colour for web-fed, simplex, and duplex printing. DuraBolt provides precision color distribution at print speeds 135 meters per minute. The DuraBolt 325C PrintEngine prints images up to 324mm width, using a tandem head design including two print heads. Each printhead can jet up to 240 litters of ink and deliver four times nozzle redundancy for every colour. It can achieve print resolutions of up to 1600 x 1280 DPI, and can be used for extended production print runs with low maintenance requirements.
The DuraBolt PrintEngine’s digital front end (DFE) is built to support DuraBolt’s flexible solution architecture. This delivers powerful process control and system automation and streamlines the interaction between the print engine and all aspects of the printing process. The Human Machine Interface (HMI) gives operators an intuitive and interactive dashboard as well as real-time status of consumable levels, press components, and environmental conditions.
QUANTUMJET ELITE-HYBRID DİJİTAL ETİKET BASKI
Maximum Web width 340mm
Printable width 324mm
Flexo No1 Print station including UV/IR over printing semi rotary mode and full rotary mode
With intermittent tension control system, up to 20” print cylinder
Durabolt print engine - Max Speed 135m/m 1600 X 1280 DPI
Australian Manufactured Main Solid Machine Frame 20mm
Flexo No 2-station including UV/IR over printing semi rotary mode and full rotary mode
With intermittent tension control system up to 20” print cylinder, combo over laminate/cold foil system
Including nip roller point.
Unwind Brake closed loop electronic tension control.
Electronic web guide
Durabolt Print Engine including Softrip Modbus network (Designed and manufactured by Memjet Sydney Australia) including CMYK 10L ink and dual print head included.
User HMI to fully operate with the Durabolt (designed and manufactured by Gulmen Digital)
Infeed/outfeed nip including closed loop servo tension control.
3000 Lineal Meter unwind station (800mm)
3000 Lineal meter Rewind station fully servo closed loop tension control with taper tension control
Automatic core chuck on/off
NIR Heater Station solution print onto majority of substrates
Semi rotary station or full rotary station no 1
Semi rotary station/full rotary station no 2
Sheeter conveyor including extension dwell time quality check area.
OPTIONAL ADDED COMPONENT AS REQUESTED:
100% inspection camera system.
QUANTUMJET ELITE II/HYBRID DİJİTAL ETİKET BASKI
Bunlar da ilginizi çekebilir